Description
Bullet Points:
2. [ Excellent Water Tester ] Drinking Water Test Kit is accurate and reliable, can test the water quality better, and has positive and negative 2-electrode rods(an iron rod and an aluminum rod).
3. [ Simple to Use ] Small, lightweight, and portable, Home Water Test Kit features simple operation, and provides you with a quick and convenient way to test the water quality.
4. [ Perfect Replacement ] Water Tester For Drinking Water provides a faster and more practical solution, the perfect replacement, and differs from traditional test paper and liquid test kits.
5. [ Broadly Used ] A practical tool kit, Water Testing Kit is perfect for drinking water, hyonics, aquariums, swimming pools, and spas, and can be used for testing the purity level of water.
Description:
2. Small and light, strong and durable.
3. Easy to use. Different colors of electrolyzed water show various impurities in the water
How to use:
1. Preparations for water testing – Take 2 white glass cups with a capacity of 100-150 ml, a cup for tap water, and the other for RO machine water, and place them on the table.
2. Ready to test – Lay the electrolyzer flat on the glass and plug it into the 220-volt power supply.
3. Testing – Press the power switchbutton on the electrolyzer to make it in the ON position to start testing.
Usually, the testing time is 30 seconds. In the end, press the power switchbutton to make it in the OFF (close) position, and finally take out the electrolyzer.
Notes:
1. Once this water electrolyzer is powered, do not hold the electrodes with your hands; do not put your fingers in the testing water; keep this water electrolyzer away from the children.
2. After using, disconnect the power, then wipe the electrode with a dry cloth, remove the water remnants on the iron rods with a mesh cloth, and store it properly.
3. Due to the lighting effects, the color of the item and that shown in the picture might have a nuance.
4. Due to manual measurement, there might be a tolerance in the product size.
Specifications:
Material: ABS+ aluminum iron
Dimensions:
body length: about 10.7*9.7*2.6cm/4.21*3.82*1.02inch
power cord length: about 80cm/31.50in
iron bar length: about 7cm/2.8cm – about 2.76/1.10inch
Measuring range: 50-200mg/L
Voltage: 220V/50Hz
Application: drinking water, water purification testing
Packing List:
1*Water Electrolyzer Body
2*Aluminum Rod
2*Iron Rod
1*Instruction