About KW350

Full system car diagnostic scanner, diagnose system including

OBD2 Engine System
Auto Transmission System
Airbag SRS System
ABS Brakes System
Center Lock System
EPB Reset
Oil Service Reset
Battery matching
TPS Check
Auto-Air Condition HVAC
Steering Wheel
Instruments
Aux.Heat
CAN Gateway
Immobilizer
Center Locks
Central Cony
Throttle Adaptation
Read & Clear Error Code

The full system is suitable for VW for Audi / For Skoda / For Seat

1. Engine System

Quickly determine the cause of the Engine System, and turn off the warning light. It also retrieves current, permanent, and pending codes in the vehicle engine system

2. ABS

When you see the ABS (Anti-lock Brake System) light is on, you know it’s serious. KW350 can help. Just use it to identify what has gone wrong by plugging in the unit to your 16-pin port (normally under your steering wheel). You can make a determination what could be the causes of the error: low brake fluid, a blown fuse, or abnormal signals from wheel sensors.

3. SRS (Airbag)

When the SRS (Safety Restraint System) light is on, it means that the Airbag Control Unit sees an issue in the system. You can use KW350 to check if there is a malfunction in the SRS system and get it fixed. It is very important that airbags are functioning properly at all times.

4. Transmission System

If you notice the following: transmission slipping, rough shifts, delayed engagement, fluid leak or transmission warning, then your car may need to be maintained. You can use KW350 to do a series of diagnostics and pinpoint the problem area for repair.

5. SAS

The steering angle sensor (SAS) is a critical part of the ESC system that measures the steering wheel position angle and rate of turn. SAS is very important for the safety of the driver and the passenger alike. When the SAS light is on, you can use KW350 to read error codes. Once a problem is fixed, you can use KW350 to recalibrate and clear the codes.

6. ESP System

Electronic Stability Program (also Electronic Stability Control) can improve a vehicle’s stability by detecting and reducing loss of traction (skidding). When ESP detects a loss of steering control, please check the ESP light and get a code reading before you do anything about it. It can help you to minimize potential losses, both monetary and in terms of human life.

7. Retrieves VIN Information and more… (Up to supporting 108 systems for VAG vehicles)

KONNWEI KW350 Professional Special Functions for VAG vehicles

1. Reset the oil service(Compatible with KWP1281, KWP2000, TP CAN, UDS)

2. EPB reset brake pad(Compatible with TP CAN(2005-2012), UDS(2012-NOW)

3. Throttle position adaption(Compatible with KWP1281, KWP2000, TP, CAN, UDS)

4. Battery matching(Compatible with TP CAN, UDS)

Oil Reset

Sometimes shops neglect to reset the maintenance-required meter if the light doesn’t happen to be on yet when they are changing the oil. Many quick-lube shops simply don’t know how to reset it. OBD2 scanner oil reset comes on strictly as a function of those miles can through maintenance-required light comes on to remind you to change your oil.

EPB Reset

Electronic handbrake is a technology that realizes parking brake by electronic control. Unlike the traditional handbrake where the driver pulls the level, in EBP the driver presses a switch. The switch then sends a command to electronic brake module. The module senses that the parking brakes need to be operated then sends a command to actuators in the brake calipers.

TPS System Check

Battery Management System (BMS) Reset

Allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.

KONNWEI KW350 all functions are compatible with VW AUDI SKODA and SEAT models

Notes:
Please inquire us if you focus on someone function, different car work with different function
Please Leave us message in below format, for example: Audi A6 2015, 2.0cc, Diesel, Oil service reset function; we will reply you within 8 hours.

Not Support Russian Cars before 2012, VAZ,UAZ,LADA ; Not works with trucks.
for Renault, SsangYong, please contact us before purchasing.

Notice

Even though it compatible with most cars, but different regions support the vehicle OBD2 protocol at different times, or some car is special design, so it may not compatible with some cars which do not support OBD2 protocol. Especially Japanese and Korean car brand.

KW350 Also Supports Full OBDII Functions for All OBD2 Certified Vehicles

1. Retrieves generic (P0, P2, P3, and U0), manufacturer specific (P1, P3, and U1) codes, and pending codes
2. Easily determines the cause of the Malfunction Indicator Light( MIL)
3. Turns off Malfunction Indicator Light (MIL), clears codes and resets monitors
4. Displays DTC definitions on the TFT screen without checking online.
5. Views freeze frame data stored in car computer board.
6. Displays monitor and I/M readiness status (emissions related).
7. Reads live PCM data stream and display in both text mode and graph mode.
8. Retrieves vehicle information (VIN, CIN and CVN)
9. Support 10 modes of diagnostics, including O2 sensor test, EVAP Test and component Test.

Simply Plug in and Play

No need any extra power, simply plug it in the OBDII 16-pin port, and just follow the on-screen instructions to go

Support Language English, German

KONNWEI KW350 Support Life-time Free Updates