Note:This link don’t include the battery and box
You can purchase the battery at your local, if you can’t found the 4 LR44 Battery, you can DIY one battery via 4 pcs LR44.

Features:
Anti-bark collar
Small and fine meniscus shape.
Easy and convenient to test the functionality and sensitivity by blowing.
Steplessly adjust sensor sensitivity by rotary type switch. It was suitable for a variety of dogs.
There are two training modes: beeping sound and static shock.

7 level of progressive training intensity to effectively discipline a variety of dogs, including those unruly ones.
Adjustable leather leash from 6″ to 30″ to suit for different dogs: small, medium and large (not for huge)
Simple and cost-effective.

Package:
1* No-Bark Collar
1* Nylon Band
(1* 4LR44 6V Batteries) This link don’t include the battery
1* Test Light
2* Long Mental Probes
2* Short Mental Probes
1* English manual

This link don’t include the battery and box

Introduction:

Principles of operation:
At the first bark,PET852 Anti-bark Collar applies a short warning tone.if a second bark occurs within thirty seconds,a more intense tone is sounded.From the third bark a more intense tone is sounded along with a short,mild shock.

The use of the warning tone followed by increasingly intense tones and shocks sets up a pattern that your dog will quickly learn is caused by its own barking.It takes time to break bad habits.

PET852 can be adjusted to control the sensitivity of the voice,according to the size of dogs barking.

Operating Instructions:

There is a switch used to adjust the sensitivity to the bark and the sensitivity will gradually be enhanced or weakened.The more sensitive,the easier to trigger the collar.

Installing/Replacing the Battery:
Take off the battery cover and make sure you install the battery correctly.
Install the new battery between the “clip”and “spring”contacts.Note that “spring” contact is for the negative end and “clip” contact is for the positive end shown below.
Putting Anti-bark Collar on Your Dog.
Place the unit around dog’s neck and adjust the collar length using the slide buckle arrangement provides with the strap.The unit should fit snugly underneath your dog’s neck.

Caution Notes:
1.Do not allow dog to chew this collar.You should also attempt to minimize scratching or clawing at the casing.
2.This device is made up of plastic and electronic components that are not digestible.Consult your local vet if your dog swallows any part of this product.
3.The collar is not intended for use as a restraining collar.If you are using a leash,use it with a separate restraining type of collar.
4.Although the Anti-bark Collar’s microprocessor is designed to differentiate your dog’s individual bark from stray environmental nosies,the unit may occasionally be activated by other vibrations or sounds.
This is normal but,it should not happen so often as to be confusing to your pet.If the unit is falsely triggered by excessive scratching,shaking of the head or rolling on the ground,your pet may be suffering from fleas or ear mites.If these activities are evident,have you pet checked by a veterinarian for parasites.