Package with 3 nozzles

Product features：

1. Pneumatic watering can, easy to use.
2. It can be used with car wash liquid to spray foam to wash the car, the foam is rich and delicate, and the car is clean.
3. Multiple functions, not only for car washing, but also for watering flowers.
4、The pressure lever, by using the pressing lever, increasing the pressure.
5. Large fan-shaped spray mode, wide spraying range, more labor-saving for car washing.
6. With locking buckle lock, water can be discharged automatiy.
7. Thickened bottle body, three-layer design:
★Inner layer: liquid contact layer, anti-corrosion
★Middle thick layer: isolate external interference
★Outer layer: high temperature resistant, resistant PP material
8. There are two kinds of nozzles, fan nozzles can be used for car washing, and flower watering nozzles are used for watering flowers.

Tips

1. The product size is manually measured, there may be a little error, the actual size of the product shall prevail.
2. The product comes with two nozzles, fan nozzles are used for car washing, and flower watering nozzles are used for watering flowers.
3. Use fan-shaped nozzles when washing the car. There is a scale on the body of the foam pot. It is ed not to exceed 1.5 liters. The foam effect is best when the ratio of car washing liquid to water is 1:10.
4. When using the pressure lever, press the handle, if you feel too much effort, stop the pressure, if you feel less effort, you can pressurize, do not continue to pressurize.

Why isn’t there a bubble? (Continually updated)

1. Check whether the foam nozzle is installed (remove the four-hole nozzle and the horn nozzle, the other one is the foam nozzle)
2. Check if the gasket and red sponge in the foam nozzle are normal (spare parts can be replaced)
3. Check whether there is a black connector in the connecting part of the pipette and the bottle cap, it may be inserted on the pot (it is very important to generate foam, there is no failure to generate foam)
4. If the black connector is lost, you can use a needle (needle for sewing clothes) to pierce two small holes in the part of the previous black connector, which can also generate foam
5. If there is still no foam, try to change the car wash liquid, or adjust the ratio of the car wash liquid to test