Description

WIFI 6 Gigabit Wireless Extender AX3000 Dual Band 2.4/5Ghz Wi-Fi6 Signal Expansion Booster Repeater Long Range Ethernet Amplifer

Product Features:

CF-XR186 is a 3000Mbps high-power WiFi6 signal amplifier. It is equipped with 4 high-gain antennas for signal enhancement. It can be used with WiFi6 routers to eliminate dead spots of WiFi signals in the home, and solve problems such as large multi-bedroom range and incomplete routing coverage of large houses. It is effective Expand WiFi coverage to achieve real whole-house WiFi coverage.

CF-XR186 supports AP, relay, and router modes.

For example:

When the WiFi signal is amplified, select the repeater mode

Analog router use, optional routing mode

If the repeater is too far away from the main route, you can choose AP mode

CF-XR186 is suitable for duplex buildings, large flats, villas, offices and other scenarios where the coverage of the router is not complete.

Product Specification:

• MT7981A+MT7976DA chip;

• Support 802.11a/b/g/n/ac/ax;

• 3000Mbps high-speed wireless transmission rate;

• 2.4GHz: 574Mbps; 5.8GHz: 2400Mbps Dual Band;

• WiFi6 technology, more compatible with WiFi6 routing;

• 4*5dBi external antenna, the signal sending and receiving is stronger through the wall;

• The antenna can be rotated flexibly, and the user can adjust the angle of the antenna to adjust the situation of signal transmission and reception;

• Support WiFi to wired, can be connected to TV, computer, etc. to connect to wired stable work;

• 1*10/100/1000Mbps RJ45 WAN/LAN Ethernet port

Pacakge list

1*CF-XR186

1*Quick installation guide

1*Network cable

WiFi 6 wireless repeater

3000Mbps dual band WiFi signal boosterEasy to achieve,Full home coverage

Say goodbye to the WiFi dead zones,and it provides good signals for all areas of whole house

PS: Users should choose the number of WIFI repeater according to the actual house area8 reasons to choose CF-XR186

Wifi6 / 3000Mbps / Two chip / Gigabit port / Multi device transmission / WPA3 Encrypt / Signal Wall-through / MultifunctionsWiFi6 Experience upgrade

AX3000 WiFi6, 160MHz Large bandwidth, Strong performance

PS: 2974Mbps is the theoretical total wireless rate of 2.4GHz and 5GHz dual band,and the actual rate will vary depending on the environmentMultiple chips for a better performance

Equipped with two high quality chips to improve the capacity of processing, which ensures more devices access, faster transmit speed and more stable signalsFull Gigabit wired port

Equipped with a gigabit Ethernet RJ45 WAN/L AN port,which can make full use of the bandwidth from most ISPHigh speed data transmission for multi-devices

Low latency even when many devices work simultaneously

PS: This function requires the terminal devices to support OFDMA and working together with the WIFI 6 routerSecure encryption

Support WPA3 encryption protocol,multiple protection, more secure network4 High gain antennas,Good signal from a long distance

Designed with 4 Omni-directional antennas for a better performance of wall-through and anti-interference, also for wider WiFi coverage and faster date trns- receive speed

PS: The antennas are an advertising effect drawing,and the internal structure us not fully displayed. Please refer to the actual objectMultiple modes apply for many scenes

01：Repeater mode ( wireless to wireless)

Extend main wireless router’ s WiFi signal to every corner of the house02：AP/Router mode (Wired to Wireless)

Transmitting WiFi signal via wired plug into wireless repeater

03：No worry of network cable ( wireless to wired)

CF-XR186 with an RJ45 Ethernet port to receive wireless to wired to offer wired internet for desktop/laptopCommon Problems of WiFi Repeater

01Q: Should we need to re-setting the WiFi repeater if it was powered off after setting it successfully?

01A: No need to set up again because all the configuration information is reserved, onlyif it is restored factory settings manually.

02Q: Can the WiFi repeater work with my WiFi router in another brand?

02A: Our WiFi repeater can compatible with most WiFi routers on the market,but it will be better if work with a COMFAST WiFi repeater.

03Q: Will my network speed becomes faster by using the WiFi repeater?

03A: It can extend the coverage of WiFi signals, but it can’ t improve the WiFi speed.

04Q: How far can the signal be extended?

04A: Our WiFi repeater can extend areas to 70-100 square meters, and you can use more pieces for wider coverage. The actual use effect depends on the surrounding environment, for example, the bearing walls will weaken the WiFi signal so that it can only extend the area of one room.

05Q: There are many rooms at home. Is one repeater enough?

05A: If need to cover multiple rooms, you can add the number of WiFi repeaters according to the actual environment.