Description
Safer life starts with our products!
Shopping Notice:
We know you have a world full of choices, thank you for choosing us!
Before order
Kindly note, our remote is the COMPATIBLE / REPLACEMENT /COPY /CLONE remote, not the original one.
Please make sure your original remote control can be used before buying.
As a general guide, if the remote you currently use is one of the remotes pictured in the ad then this remote will be copy with your remote.
If you are not so sure, please contact us without hesitate.
Please pay attention that customs tax should be paid by buyer, seller can’t support any customs tax.
Charges may be due to different national policies. Please understanding it.
1. Type of programming:Programming with the receiver
2. Frequency:433MHz
3. Code:Rolling Code
4. Buttons:2/4
5. Battery:Include Battery
Compatible with:
For TRC1
For TRC2
For TRC3
For MITTO 2
For MITTO 4
For MITTO2M
For MITTO4M
For MITTO B RCB 02
For MITTO B RCB 04
For KLEIO B RCA 02
For KLEIO B RCA 04
Access to receiver required. Please make sure you got access to your receiver/opener before purchase.
How to program :
1. Open the casing of your receiver. It is located next to your motor.
2. On the receiver circuit board, press the programming button (SW1). The LED light of the receiver blinks. Let the button go.
3. Press both buttons on your new remote control at the same time. Let them go. The LED light of the receiver remains lit fixedly.
4. Press the left button on your new remote control. Let it go. The LED light of the receiver blinks.
5. Wait 5 seconds. The LED light of the receiver turns off.
6. Repeat this procedure for the right button of your new remote control. This time, use the programming button SW2.
7. Wait 10 seconds.
8. Your new remote control is programmed.
1. Press the“OK”button on your receiver twice. The screen displays “PARA.”
2. Press the“-” button on your receiver twice. The screen displays“RADIO.”
3. Press the “OK” button on your receiver once. The screen displays“ADI STRT.’
4. Press the“OK” button on your receiver once. The screen displays “Hidden Button.’
5. Press both buttons on your new remote control at the same time. Keep them pressed down.The screen displays “Released”.
6. Let the buttons go. The screen displays “Desired Button”.
7. Press a button on your new remote control. The screen displays “OK” .
8. Wait 10 seconds.
9. Your new remote control is programmed.
Include:
1 x Remote Control
1 x Battery
1 x keychain
1 x English Manual
Return:
Returns are accepted .
In case of a refund all items must be returned undamaged, in a re-sellable condition.
For DOA (Defective On Arrival) items, which will be replaced or refunded, please inform us within 24 hours of arrival, please also keep all of the components and original packaging as further checking might be required.
Faulty items must be returned for repair or exchange.
All products are individually inspected before being dispatched, to ensure items are sent out in perfect condition.
1.
2. If you are not satisfied by any means, please give us an opportunity to offer you a proper solution. Thanks!
Contact us:
1.If you have any question, Please contact us.All message will be answered within 24 hours from Monday to Saturday.