Specification:
Materials: carbon steel, ABS and Aluminum
Color: black
Usage: Cut grafting stocks diameter from about 5mm/0.02in to 1.4cm/0.55in
Trimming blades thickness: about 3mm/0.01in
Size: about 27cm*10cm/10.5*3.9in

Grafting tape width: 2cm/0.79in (1cm=0.39inches)
How to use:

Step 1: Hold the grafting stock in the grafting tool and squeeze the handle to make the cut, repeat this step to cut stem from the donor plant. Take care to ensure that the groove is cut in the stock plant.

Step 2: Slide the donor stem into the groove of the stock plant, matching the cut surfaces as closely as possible. If the stock and donor plant are not the same size, match on the side only.

Step 3: Place sterilizing material around the joint, and bind with tape, the sterilizing material will protect against bacteria and weather conditions.

Step 4: Use the pruner to cut useless branches from the plant.
Step 5: The grafting tool with “V & U & Ω” blade and the end of blade both can cut, one piece blade can be used as two pieces blade, so you would have total six pieces blade.

Note:
1. Keep out of reach of children do not use on dry or old hard wood.
2. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
3. Please allow 1-2cm measuring deviation due to manual measurement.