Description

• Please note the product options and purchase correctly

  STC-3008 is dual temperature without humidity

  Only STC-3028 has humidity controller.

  We send according to the buyer’s choice, if the choice is wrong, it is not a condition for refund.

• STC-3028:

• Be able to control temperature and humidity at the same time.

• Be able to connect with humidifier and dehumidifier equipment at the same time.

• Be able to connect with refrigeration/ heating and humidifier/dehumidifier equipment at the same time.

• Supporting Temp and Humidity Calibration

• Dual Display Window,Be able to display measured temperature/humidity and set temp/humidity at the same time

Power Supply:110-220VAC ± 10%, 50/60Hz or DC 12V

Long press UP 1 button for 3 seconds, ① display flashes, press UP or DOWN button to set the start temperature(20°C default)

Long press DOWN 1 button for 3 seconds, ① the display flashes, press UP or DOWN button to set the stop temperature (30°C default)

Long press UP 2 button for 3 seconds, ② display flashes, press UP or DOWN button to set the start humidity(40%RH default)

Long press DOWN 2 button for 3 seconds, ② the display flashes, press UP or DOWN button to set the stop humidity (60%RH default)

Long press DOWN 1 and DOWN 2 button for 3 seconds to reset the controller.

Long press UP 1 and DOWN 1 to calibrate the temperature, -10~10 °C

Long press UP 2 and DOWN 2 to calibrate the humidity

STC-3008：

Name:Digital Dual Temperature Controller

Temperature measuring range:-55°C~120°C

Resolution:0.1

Controlling Accuracy:1°C

Relay contact current:10A/240V AC

Temperature Sensor:NTC10K

Length of cable:1m

Power supply:DC 12V/110~220V( choose the one you need )

Data Save:YES

Working temperature:0°C~50°C

Storage Temperature:-10°C~60°C

Long press UP 1 button for 3 seconds, ① display flashes, press UP or DOWN button to set the start temperature(25°C default)

Long press DOWN 1 button for 3 seconds, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)

Long press UP 2 button for 3 seconds, ② display flashes, press UP or DOWN button to set the start temperature(25°C default)

Long press DOWN 2 button for 3 seconds, the display flashes, press UP or DOWN button to set the stop temperature (40°C default)

Long press DOWN 1 and DOWN 2 button for 3 seconds to reset the controllers.

Heating Mode–Start temperature<Stop temperature

Cooling Mode–Start temperature>Stop temperature