Description
Attention please!
The 3 Colors in one version is 3000k warm white/4000k natural white/6000k cold white in one lamp!
Package includes:
1 X Motion Sensor Light
1 X USB cable
1 X Magnet piece
1 X Manual (English)
Specifications:
Item type: Motion Sensor Light / Induction Lamp
Size: About 200*40*9mm / 300*40*9mm/320*40*9mm/400*40*9mm
Product weight: 110g/130g /150g/175g/200g
Light color: 6000K Cold White/ 3000K Warm White
Induction method: Human body and Light induction
Induction distance: 3-5 meters
Delay time: 15-20 seconds
Battery capacity: 800mah/900mah /1000mah/1200mah
Power: 1.2W/2W/2.5W
Lumen: 90Lm/W/120Lm/W/200Lm/W
Material: Aluminum + ABS
Battery life: 500 times Charge-Discharge
Applications:
With portability and flexibility, this LED light is convenience for kitchen, counter, closet, cabinet, stairwell, hallway, basement, workshop, garage, etc.Not only can be a indoor motion sensor light or makeup light,but also can be a camping light outdoors.
Notes:
1-2cm error might exist due to manual measurements, please kindly understand. The colors deviation might differ due to different monitor settings.
ăQuick Charging and Long Battery Lifeă
LED Closet Light with a built-in rechargeable lithium-ion battery, it only needs 3 hours to charge quickly, It can last for over 5 Hours under Always On Mode, if lighted eight times a day, it can last for about three months.
Redlight:Is Charging
Greenlight:Is Finished Charging
ăSuper Bright But Gentle Eye-care Lightingă
Uniform luminescence, gentle and flicker-free lighting.
[Usage Instruction]
Step 1: Short press the button to switch the light mode to normal light mode.
Step 2: Short press the button to switch the light mode to induction mode.
(Built-in light sensing module.The lamp will not turn on in a bright environment)
Step 3: Short press the button to switch the light mode to off mode.
Step 4: Long press the button to adjust the light brightness(In the constant light mode)
ăEasy to InstallăOur Cabinet Light built-in magnet, you can also stick it on any ironwork. no need tools, screws or nuts. You can stick-on anywhere you want it to be.
1,Determine the installation distance of the iron sheet
2,The adhesive after tearing off the iron sheet Stick to the target location
3,